Spa Maintenance

SPA MAINTENANCE
Start Up

1. Fill spa with cold water to correct water level indicated.

2. Turn power on. Verify water flow before proceeding.

3. Test water and adjust total alkalinity and pH if necessary.

4. Turn pumps on high while adding chemicals.

5. Add 8 oz. of METAL & STAIN CONTROL.

6. Add two tablespoons of CHLORINE.

7. Set temperature as desired.

Each Use

• Add 1 teaspoon of CHLORINE per person.

• Spas with OZONE should maintain a chlorine level of 1.0 ppm.

• Set Frog - Yellow to 3 - Lasts 3 to 4 weeks.

• Set Frog - Blue to 6 - Lasts 3 to 4 months.


Monday

• Test water and adjust total alkalinity and pH if necessary.

• Add 2 oz. of SPA PERFECT.


Wednesday

• Test water and adjust total alkalinity and pH if necessary.

• Add 2 oz. of CRYSTAL CLEAR CLARIFIER.


Friday

• Test water and adjust total alkalinity and pH if necessary.• Add 2 oz. of SHOCK TREATMENT. • Rinse filter off with high pressure garden hose.


Monthly

• Soak filters in FILTER REVIVE for a period of six hours to overnight.

• Clean spa cover with COVER CARE CLEANER and apply 303 PROTECTANT.

• Inspect equipment area.

• Test GFCI Breaker, reset filter cycle and heat mode.


Draining

• Every 4 months drain and refill.

• Replace the Frog Blue Mineral Purifier .
WARNING: Cloudy water may be unsafe, refer to the trouble shooting section.